/*******************************************************************************
* File Name: main.c
*
* Version: 2.20
*
* Description:
*  This project demonstrates the UART transmission mechanism. 
*  Data is sent through serial port that is visible in the Hyperterminal and on 
*  the LCD. ASCII characters from 0x20 to 0x7F(Space to ~ )  that can be 
*  displayed through Hyperterminal/LCD at the same time Interrupt is triggered
*  and incremented while sending.
*
********************************************************************************
* Copyright 2012-2017, Cypress Semiconductor Corporation. All rights reserved.
* This software is owned by Cypress Semiconductor Corporation and is protected
* by and subject to worldwide patent and copyright laws and treaties.
* Therefore, you may use this software only as provided in the license agreement
* accompanying the software package from which you obtained this software.
* CYPRESS AND ITS SUPPLIERS MAKE NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
* WITH REGARD TO THIS SOFTWARE, INCLUDING, BUT NOT LIMITED TO, NONINFRINGEMENT,
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*******************************************************************************/

#include <project.h>

#define LCD_NUM_COLUMNS     (16u)



int main()
{    
    uint8 ch;           /* Data sent on the serial port */
    uint8 count = 0u;    /* Initializing the count value */
    uint8 pos = 0u;
 

    UART_1_Start();     /* Enabling the UART */
    LCD_Char_1_Start(); /* Enabling the LCD */
    //LCD_Char_1_PrintString("bonjour");
    
    while(1){
        if (UART_1_GetRxBufferSize()>0) {   /* Si une donnée est recue de l'UART*/
            ch=UART_1_GetChar();            /*prend la valeur du caractère*/

            count++;        
            if(count % LCD_NUM_COLUMNS == 0u) /* If the count value reaches the count 16 start from first location */
            {
                pos = 0u;  /* resets the count value */
                LCD_Char_1_WriteControl(LCD_Char_1_CLEAR_DISPLAY); /* Display will be cleared when reached count value 16 */
            }    

            LCD_Char_1_Position(0u, pos++);   /* LCD position to the count++ */
            LCD_Char_1_PutChar(ch);         /* print the value in the LCD */
                        
            LCD_Char_1_Position(1u, 0u);
            LCD_Char_1_PrintInt8(count);    /* prints the count in the LCD */
            CyDelay(200u);
        }

    }
}


/* [] END OF FILE */